??彩票注册??

同步千斤顶类 Your present location: ??彩票注册?? > Products > Synchronous Jacks Synchronous Jacks
RSM series thin jack
Posted on: 2012-12-27 9:26:41 Author: Branch of hydraulic jacks Source: hydraulic jack factory

RSM series thin jack

Details of RSM series thin jack :

I. Use
RSM series of thin jacks , smaller size, and can produce greater working capacity, especially for use in places with narrow space, and have light and flexible functions, high jacking force, etc. This product is widely used in power, chemical, steel, bridges , Machinery and other enterprises, and give full play to its infinite power.

How to use
1. If the amount of oil in the pump body is insufficient, you need to add working oil (10 # engine oil) to the pump to work.
2. Estimate the lifting weight and avoid overloading.
3. Determine the center of gravity of the lifting object and select the point of force for the jack. At the same time, you must consider whether the softness and hardness of the ground is lined with tough wood to avoid the risk of falling when lifting.
4. After the jack lifts the heavy object, it should be supported with tough wood in time. It is forbidden to use the jack as a support, and several jacks are prohibited to be used at the same time, so as to avoid unbalanced load and the risk of falling.
5. When in use, first connect the quick connector of the manual pump to the top, then select the position, and tighten the oil drain screw on the oil pump to work. Loosen the drain screw and unload the oil cylinder.

Third, the basic parameters:

model
Tonnage T
Stroke mm
Cylinder area cm 2
Oil solubility cm 3
Body height mm
Stretching height mm
Outer diameter mm
Weight kg
RSM-50
5
6
6.4
4
33
39
59 × 41
1
RSM-100
10
11
14.5
16
43
54
83 × 56
1.4
RSM-200
20
11
28.6
31
52
63
102 × 76
3.1
RSM-300
30
13
42
55
59
72
118 × 95
4.5
RSM-500
50
16
62.1
99
67
83
140 × 114
6.8
RSM-750
75
16
102.7
164
80
96
165 × 139
11.4
RSM-1000
100
16
126.8
203
86
102
178 × 152
14.5
RSM-1500
150
14
198.1
277
100
114
216 × 191
26.3


The parameters in the table are subject to change without notice.

Fourth, matters needing attention

a) If runaway occurs during use, first loosen the oil drain screw on the pump body, lift the pump body upright and hit it downwards a few times, then tighten the oil drain screw to continue using.
b) When there is a load, do not remove the quick connector to avoid accidents and damage to the parts.
c) The machine uses oil as the medium, and the maintenance of the oil and the machine must be done to prevent blockage or oil leakage, which will affect the use effect.
d) For new or long-time hydraulic jacks, because there is more air in the cylinder, the piston rod may have a slight jump phenomenon when it is used. You can reciprocate the hydraulic jacks 2-3 times under no load to eliminate Air in the cavity. For long-term idle jacks, the seals harden due to long-term non-operation of the seals, which affects the service life of the hydraulic jacks. When the hydraulic jacks are not in use, the hydraulic jacks are reciprocated 2-3 times a month without load. .


Previous: QFB Ultra-thin Jack Next: QFZ Tension Hollow Jack

RSM Series Thin Jack Related Articles

RSM Series Thin Jack Related Products


Copyright Yangzhou Zhongke Hydraulic Machinery Co., Ltd. 全国订购及服务热线: 13852197995 Optimization support: Yunsoubao Service time: Monday to Sunday 08:30 — 20:00 National order and service hotline: 13852197995
Record Number: 苏 ICP 备 16010742 号 -1
真人游戏平台注册 七乐彩 天天电玩城 欢乐拼三张